在人們的生活當中，很多情況下都需要使用到遮陽棚，因為它使用起來非常的方便有效，不過需要按照規范進行安裝并且細節方面要做到位，才能夠使他倆發揮原有的功能，而且在使用的過程當中還需要留意到天氣的問題。那么濟南遮陽棚的使用安裝要隨時留意什么？

In people's life, sunshades are needed in many cases because they are very convenient and effective to use. However, they need to be installed according to the specifications and the details should be in place to enable them to play their original functions. In addition, they need to pay attention to the weather during the use process. So what should we pay attention to when using and installing the sunshade in Jinan?

一、注意隨時留意天氣相關的資訊

1、 Pay attention to weather-related information at any time

在使用遮陽棚的時候，盡量要在安排有人在旁邊看護，否則如果沒有人的情況下建議收回遮陽棚。因為如果天氣發生變化特別是刮大風的時候還有可能會造成損壞，還有雨雪雷暴之類的天氣來臨之前就應該要提前做好一些保護的準備工作，濟南遮陽棚廠家強調特別是在冰凍的情況下尤其要采取正確的處理措施。

When using the sunshade, try to arrange someone to take care of it, otherwise it is recommended to take back the sunshade if there is no one. Because if the weather changes, especially when the wind is strong, it may cause damage, and before the weather like rain, snow and thunderstorm comes, some protection preparations should be made in advance. Jinan sunshade manufacturer stressed that the correct treatment measures should be taken especially in freezing conditions.

二、注意事項

2、 Safety precautions

在安裝和設置濟南遮陽棚的時候如果高度在相應的范圍內，那么應該按照規定的道路標準去進行安裝。在濟南遮陽傘展開或者是回收的時候要避免其他人或者障礙物在附近，以免在使用的過程當中不小心磕壞物品，所以保證廠家提醒應該要保持一定的距離并且根據限位開關來進行調整一定能夠達到使用的需求。

If the height of Jinan sunshade is within the corresponding range, it should be installed according to the national road safety standards. In Jinan, when the sunshade is deployed or recycled, it is necessary to avoid other people or obstacles nearby, so as to avoid accidentally damaging objects during use. Therefore, the manufacturer should remind that a certain distance should be kept and adjusted according to the limit switch to meet the needs of use.

三、注意電機連接應該要規范

3、 Note that the motor connection should be standardized

有些遮陽棚是通電進行自動操作的，因此需要連接電機使用，所以應該提醒要選擇批準正規的電氣安裝公司來進行相關的按照工作。并且遮陽棚廠家所有的連接細節都應該要按照的規范去進行操作，尤其是接線方面不可以出任何的差錯。

Some sunshades are powered on for automatic operation, so they need to be connected to the motor for use. Therefore, it should be reminded to select the electrical installation company approved by the state to carry out the relevant work. In addition, all the connection details of the sunshade manufacturer should be operated in accordance with the national specifications, especially the wiring should not make any mistakes.

此外還應該要注意正確的操作收回和展開的工作。廠家介紹比如應該要保障遮陽棚打開之后的傾斜角度要在規定的范圍之內，這樣做不僅使外觀上更加美觀，而且在使用的時候可以避免積累雨水之類的情況發生，還有不要連續的去進行展開或收回一面是馬達發熱過度影響使用效果。更多相關內容就來我們網站http://www.xzzokh.cn咨詢了解吧！

In addition, attention should also be paid to the correct operation of retraction and expansion. The manufacturer said, for example, that the tilt angle of the sunshade after opening should be within the specified range, which not only makes the appearance more beautiful, but also can avoid the accumulation of rain and other situations during use. Also, do not continue to expand or retract the sunshade because the excessive heat of the motor affects the use effect. Come to our website for more relevant content http://www.xzzokh.cn Ask about it!